Menghubungkan VLAN Yang Sama Antar Switch di Cisco

Switch>enable
Switch#con
Switch#conf
Switch#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Switch(config)#vlan 10
Switch(config-vlan)#name vlan-grafika
Switch(config-vlan)#exit
Switch(config)#vlan 20
Switch(config-vlan)#name vlan-akutansi
Switch(config-vlan)#exit



Switch(config)#int fa0/1
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 10
Switch(config-if)#exit
Switch(config)#int fa0/2
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 20
Switch(config-if)#exit


Switch(config)#int fa0/3
Switch(config-if)#switchport mode trunk